| Autore |
 Discussione  |
|
|
zio zeb
New Member
37 Messaggi |
Inserito il - 05/10/2005 : 21:30:44
|
Ciao a tutti,
sono un utente gnu-linux in erba. Recentemente ho fatto un contratto isdn, mancando nella mia zona l'adsl ed ho acquistato un mdm Atlantis land mistral USB ISDN TA 128 CE, ma non so come configurarlo in linux. Fino a ieri lavoravo con fedora4, oggi ho installato ubuntu breezy 5.10 sperando che una distribuzione diversa mi risolvesse i problemi. Ma non è così. Qualcuno mi può spiegare i passi per configurarlo (ammesso che siua un prodotto adatto a linux, ho qualce dubbio anche in tal senso)?
ciao e grazie
|
|
|
Gimli
Moderatore
.jpg)
Città: Belluno
1870 Messaggi |
Inserito il - 05/10/2005 : 22:57:13
|
Boh, google ritorna risultati ambigui: alcuni dicono che non funziona, altri che dovrebbe andare come un comune modem 56k, boh.
Prova così:
- apri una console
- digita tail -f /var/log/messages
- inserisci il cavetto del modem nella porta USB
- posta i messaggi che appaiono
Vediamo che si può fare.
Ciao  |
 |
|
|
zio zeb
New Member
37 Messaggi |
 Inserito il - 11/10/2005 : 18:11:40
|
Scusa il ritardo, ecco qua il prodotto... se ci capisci qualcosa... grazie
Oct 6 18:18:51 camata syslogd 1.4.1#17ubuntu1: restart.
Oct 6 18:18:51 camata kernel: Inspecting /boot/System.map-2.6.12-6-386
Oct 6 18:18:51 camata kernel: Loaded 28939 symbols from /boot/System.map-2.6.12-6-386.
Oct 6 18:18:51 camata kernel: Symbols match kernel version 2.6.12.
Oct 6 18:18:51 camata kernel: No module symbols loaded - kernel modules not enabled.
Oct 6 18:18:51 camata kernel: 0000:00:09.0
Oct 6 18:18:51 camata kernel: [4294668.986000] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 7 9 10 11 12 14 15)
Oct 6 18:18:51 camata kernel: [4294668.986000] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
Oct 6 18:18:51 camata kernel: [4294668.986000] ACPI: PCI Interrupt Link [LNK3] (IRQs *3 4 5 7 9 10 11 12 14 15)
Oct 6 18:18:51 camata kernel: [4294668.987000] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
Oct 6 18:18:51 camata kernel: [4294668.987000] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
Oct 6 18:18:51 camata kernel: [4294668.987000] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 *11 12 14 15)
Oct 6 18:18:51 camata kernel: [4294668.988000] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
Oct 6 18:18:51 camata kernel: [4294668.988000] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
Oct 6 18:18:51 camata kernel: [4294668.989000] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 *11 12 14 15)
Oct 6 18:18:51 camata kernel: [4294668.989000] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
Oct 6 18:18:51 camata kernel: [4294668.989000] ACPI: PCI Interrupt Link [LSMB] (IRQs *3 4 5 7 9 10 11 12 14 15)
Oct 6 18:18:51 camata kernel: [4294668.990000] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 7 9 10 11 12 14 15)
Oct 6 18:18:51 camata kernel: [4294668.990000] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
Oct 6 18:18:51 camata kernel: [4294668.990000] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
Oct 6 18:18:51 camata kernel: [4294668.991000] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15)
Oct 6 18:18:51 camata kernel: [4294668.991000] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
Oct 6 18:18:51 camata kernel: [4294668.991000] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
Oct 6 18:18:51 camata kernel: [4294668.992000] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
Oct 6 18:18:51 camata kernel: [4294668.992000] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
Oct 6 18:18:51 camata kernel: [4294668.992000] ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
Oct 6 18:18:51 camata kernel: [4294668.993000] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
Oct 6 18:18:51 camata kernel: [4294668.993000] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
Oct 6 18:18:51 camata kernel: [4294668.994000] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
Oct 6 18:18:51 camata kernel: [4294668.994000] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
Oct 6 18:18:51 camata kernel: [4294668.994000] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
Oct 6 18:18:51 camata kernel: [4294668.995000] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
Oct 6 18:18:51 camata kernel: [4294668.995000] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
Oct 6 18:18:51 camata kernel: [4294668.996000] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
Oct 6 18:18:51 camata kernel: [4294668.996000] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
Oct 6 18:18:51 camata kernel: [4294668.997000] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
Oct 6 18:18:51 camata kernel: [4294668.997000] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
Oct 6 18:18:51 camata kernel: [4294668.998000] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
Oct 6 18:18:51 camata kernel: [4294669.002000] Linux Plug and Play Support v0.97 (c) Adam Belay
Oct 6 18:18:51 camata kernel: [4294669.002000] pnp: PnP ACPI init
Oct 6 18:18:51 camata kernel: [4294669.009000] pnp: PnP ACPI: found 16 devices
Oct 6 18:18:51 camata kernel: [4294669.009000] PnPBIOS: Disabled by ACPI PNP
Oct 6 18:18:51 camata kernel: [4294669.009000] PCI: Using ACPI for IRQ routing
Oct 6 18:18:51 camata kernel: [4294669.009000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Oct 6 18:18:51 camata kernel: [4294669.066000] pnp: 00:00: ioport range 0x4000-0x407f could not be reserved
Oct 6 18:18:51 camata kernel: [4294669.066000] pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
Oct 6 18:18:51 camata kernel: [4294669.066000] pnp: 00:00: ioport range 0x4400-0x447f has been reserved
Oct 6 18:18:51 camata kernel: [4294669.066000] pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved
Oct 6 18:18:51 camata kernel: [4294669.066000] pnp: 00:00: ioport range 0x4800-0x487f has been reserved
Oct 6 18:18:51 camata kernel: [4294669.066000] pnp: 00:00: ioport range 0x4880-0x48ff has been reserved
Oct 6 18:18:51 camata kernel: [4294669.066000] audit: initializing netlink socket (disabled)
Oct 6 18:18:51 camata kernel: [4294669.067000] VFS: Disk quotas dquot_6.5.1
Oct 6 18:18:51 camata kernel: [4294669.067000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Oct 6 18:18:51 camata kernel: [4294669.067000] devfs: 2004-01-31 Richard Gooch (rgooch[ presso ]atnf.csiro.au)
Oct 6 18:18:51 camata kernel: [4294669.067000] devfs: boot_options: 0x0
Oct 6 18:18:51 camata kernel: [4294669.067000] Initializing Cryptographic API
Oct 6 18:18:51 camata kernel: [4294669.067000] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
Oct 6 18:18:51 camata kernel: [4294669.067000] assign_interrupt_mode Found MSI capability
Oct 6 18:18:51 camata kernel: [4294669.067000] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
Oct 6 18:18:51 camata kernel: [4294669.067000] assign_interrupt_mode Found MSI capability
Oct 6 18:18:51 camata kernel: [4294669.067000] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
Oct 6 18:18:51 camata kernel: [4294669.067000] assign_interrupt_mode Found MSI capability
Oct 6 18:18:51 camata kernel: [4294669.067000] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
Oct 6 18:18:51 camata kernel: [4294669.067000] assign_interrupt_mode Found MSI capability
Oct 6 18:18:51 camata kernel: [4294669.067000] isapnp: Scanning for PnP cards...
Oct 6 18:18:51 camata kernel: [4294669.418000] isapnp: No Plug & Play device found
Oct 6 18:18:51 camata kernel: [4294669.433000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Oct 6 18:18:51 camata kernel: [4294669.435000] serio: i8042 AUX port at 0x60,0x64 irq 12
Oct 6 18:18:51 camata kernel: [4294669.436000] serio: i8042 KBD port at 0x60,0x64 irq 1
Oct 6 18:18:51 camata kernel: [4294669.436000] Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
Oct 6 18:18:51 camata kernel: [4294669.436000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Oct 6 18:18:51 camata kernel: [4294669.437000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Oct 6 18:18:51 camata kernel: [4294669.438000] io scheduler noop registered
Oct 6 18:18:51 camata kernel: [4294669.438000] io scheduler anticipatory registered
Oct 6 18:18:51 camata kernel: [4294669.438000] io scheduler deadline registered
Oct 6 18:18:51 camata kernel: [4294669.438000] io scheduler cfq registered
Oct 6 18:18:51 camata kernel: [4294669.438000] RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Oct 6 18:18:51 camata kernel: [4294669.438000] EISA: Probing bus 0 at eisa.0
Oct 6 18:18:51 camata kernel: [4294669.438000] Cannot allocate resource for EISA slot 4
Oct 6 18:18:51 camata kernel: [4294669.438000] EISA: Detected 0 cards.
Oct 6 18:18:51 camata kernel: [4294669.438000] NET: Registered protocol family 2
Oct 6 18:18:51 camata kernel: [4294669.448000] IP: routing cache hash table of 4096 buckets, 32Kbytes
Oct 6 18:18:51 camata kernel: [4294669.448000] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
Oct 6 18:18:51 camata kernel: [4294669.448000] TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
Oct 6 18:18:51 camata kernel: [4294669.448000] TCP: Hash tables configured (established 32768 bind 32768)
Oct 6 18:18:51 camata kernel: [4294669.448000] NET: Registered protocol family 8
Oct 6 18:18:51 camata kernel: [4294669.448000] NET: Registered protocol family 20
Oct 6 18:18:51 camata kernel: [4294669.448000] ACPI wakeup devices:
Oct 6 18:18:51 camata kernel: [4294669.448000] HUB0 XVR0 XVR1 XVR2 XVR3 USB0 USB2 MMAC MMCI UAR1
Oct 6 18:18:51 camata kernel: [4294669.448000] ACPI: (supports S0 S1 S3 S4 S5)
Oct 6 18:18:51 camata kernel: [4294669.448000] Freeing unused kernel memory: 224k freed
Oct 6 18:18:51 camata kernel: [4294669.487000] usbcore: registered new driver usbfs
Oct 6 18:18:51 camata kernel: [4294669.487000] usbcore: registered new driver hub
Oct 6 18:18:51 camata kernel: [4294669.488000] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
Oct 6 18:18:51 camata kernel: [4294669.488000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23
Oct 6 18:18:51 camata kernel: [4294669.488000] ohci_hcd 0000:00:02.0: nVidia Corporation CK804 USB Controller
Oct 6 18:18:51 camata kernel: [4294669.498000] input: AT Translated Set 2 keyboard on isa0060/serio0
Oct 6 18:18:51 camata kernel: [4294669.499000] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
Oct 6 18:18:51 camata kernel: [4294669.499000] ohci_hcd 0000:00:02.0: irq 23, io mem 0xd0104000
Oct 6 18:18:51 camata kernel: [4294669.552000] hub 1-0:1.0: USB hub found
Oct 6 18:18:51 camata kernel: [4294669.552000] hub 1-0:1.0: 10 ports detected
Oct 6 18:18:51 camata kernel: [4294669.561000] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
Oct 6 18:18:51 camata kernel: [4294669.561000] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 22
Oct 6 18:18:51 camata kernel: [4294669.561000] ehci_hcd 0000:00:02.1: nVidia Corporation CK804 USB Controller
Oct 6 18:18:51 camata kernel: [4294669.561000] ehci_hcd 0000:00:02.1: debug port 1
Oct 6 18:18:51 camata kernel: [4294669.561000] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
Oct 6 18:18:51 camata kernel: [4294669.561000] ehci_hcd 0000:00:02.1: irq 22, io mem 0xd0105000
Oct 6 18:18:51 camata kernel: [4294669.561000] ehci_hcd 0000:00:02.1: park 0
Oct 6 18:18:51 camata kernel: [4294669.561000] ehci_hcd 0000:00:02.1: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
Oct 6 18:18:51 camata kernel: [4294669.561000] hub 2-0:1.0: USB hub found
Oct 6 18:18:51 camata kernel: [4294669.561000] hub 2-0:1.0: 10 ports detected
Oct 6 18:18:51 camata kernel: [4294669.593000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Oct 6 18:18:51 camata kernel: [4294669.593000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Oct 6 18:18:51 camata kernel: [4294669.593000] ACPI: bus type ide registered
Oct 6 18:18:51 camata kernel: [4294669.595000] SCSI subsystem initialized
Oct 6 18:18:51 camata kernel: [4294669.597000] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
Oct 6 18:18:51 camata kernel: [4294669.597000] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 21
Oct 6 18:18:51 camata kernel: [4294669.597000] ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD800 irq 21
Oct 6 18:18:51 camata kernel: [4294669.597000] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD808 irq 21
Oct 6 18:18:51 camata kernel: [4294669.798000] ata1: no device found (phy stat 00000000)
Oct 6 18:18:51 camata kernel: [4294669.798000] scsi0 : sata_nv
Oct 6 18:18:51 camata kernel: [4294669.840000] ohci_hcd 0000:00:02.0: wakeup
Oct 6 18:18:51 camata kernel: [4294669.999000] ata2: no device found (phy stat 00000000)
Oct 6 18:18:51 camata kernel: [4294669.999000] scsi1 : sata_nv
Oct 6 18:18:51 camata kernel: [4294670.000000] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
Oct 6 18:18:51 camata kernel: [4294670.000000] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 20
Oct 6 18:18:51 camata kernel: [4294670.000000] ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xC400 irq 20
Oct 6 18:18:51 camata kernel: [4294670.000000] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xC408 irq 20
Oct 6 18:18:51 camata kernel: [4294670.232000] usb 1-2: new full speed USB device using ohci_hcd and address 2
Oct 6 18:18:51 camata kernel: [4294670.355000] ata3: dev 0 ATA, max UDMA/133, 398297088 sectors: lba48
Oct 6 18:18:51 camata kernel: [4294670.356000] nv_sata: Primary device added
Oct 6 18:18:51 camata kernel: [4294670.356000] nv_sata: Primary device removed
Oct 6 18:18:51 camata kernel: [4294670.356000] nv_sata: Secondary device added
Oct 6 18:18:51 camata kernel: [4294670.356000] nv_sata: Secondary device removed
Oct 6 18:18:51 camata kernel: [4294670.356000] ata3: dev 0 configured for UDMA/133
Oct 6 18:18:51 camata kernel: [4294670.356000] scsi2 : sata_nv
Oct 6 18:18:51 camata kernel: [4294670.557000] ata4: no device found (phy stat 00000000)
Oct 6 18:18:51 camata kernel: [4294670.557000] scsi3 : sata_nv
Oct 6 18:18:51 camata kernel: [4294670.557000] Vendor: ATA Model: Maxtor 6B200M0 Rev: BANC
Oct 6 18:18:51 camata kernel: [4294670.557000] Type: Direct-Access ANSI SCSI revision: 05
Oct 6 18:18:51 camata kernel: [4294672.644000] NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
Oct 6 18:18:51 camata kernel: [4294672.644000] NFORCE-CK804: chipset revision 162
Oct 6 18:18:51 camata kernel: [4294672.644000] NFORCE-CK804: not 100%% native mode: will probe irqs later
Oct 6 18:18:51 camata kernel: [4294672.644000] NFORCE-CK804: 0000:00:06.0 (rev a2) UDMA133 controller
Oct 6 18:18:51 camata kernel: [4294672.644000] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
Oct 6 18:18:51 camata kernel: [4294672.644000] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Oct 6 18:18:51 camata kernel: [4294673.316000] hda: HL-DT-STDVD-ROM GDR8163B, ATAPI CD/DVD-ROM drive
Oct 6 18:18:51 camata kernel: [4294674.030000] hdb: HL-DT-ST DVDRAM GSA-4163B, ATAPI CD/DVD-ROM drive
Oct 6 18:18:51 camata kernel: [4294674.087000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Oct 6 18:18:51 camata kernel: [4294677.181000] hda: ATAPI 52X DVD-ROM drive, 256kB Cache
Oct 6 18:18:51 camata kernel: [4294677.181000] Uniform CD-ROM driver Revision: 3.20
Oct 6 18:18:51 camata kernel: [4294677.189000] hdb: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
Oct 6 18:18:51 camata kernel: [4294677.200000] SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB)
Oct 6 18:18:51 camata kernel: [4294677.200000] SCSI device sda: drive cache: write back
Oct 6 18:18:51 camata kernel: [4294677.200000] SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB)
Oct 6 18:18:51 camata kernel: [4294677.200000] SCSI device sda: drive cache: write back
Oct 6 18:18:51 camata kernel: [4294677.200000] /dev/scsi/host2/bus0/target0/lun0: p1 p2 p3 p4
Oct 6 18:18:51 camata kernel: [4294677.241000] Attached scsi disk sda at scsi2, channel 0, id 0, lun 0
Oct 6 18:18:51 camata kernel: [4294677.527000] ACPI: Fan [FAN] (on)
Oct 6 18:18:51 camata kernel: [4294677.529000] ACPI: CPU0 (power states: C1[C1])
Oct 6 18:18:51 camata kernel: [4294677.529000] ACPI: Processor [CPU0] (supports 8 throttling states)
Oct 6 18:18:51 camata kernel: [4294677.530000] ACPI: Thermal Zone [THRM] (40 C)
Oct 6 18:18:51 camata kernel: [4294677.608000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel[ presso ]redhat[.com]
Oct 6 18:18:51 camata kernel: [4294677.623000] cdrom: open failed.
Oct 6 18:18:51 camata kernel: [4294677.634000] cdrom: open failed.
Oct 6 18:18:51 camata kernel: [4294677.640000] Attempting manual resume
Oct 6 18:18:51 camata kernel: [4294677.640000] swsusp: Suspend partition has wrong signature?
Oct 6 18:18:51 camata kernel: [4294677.645000] EXT3-fs: INFO: recovery required on readonly filesystem.
Oct 6 18:18:51 camata kernel: [4294677.645000] EXT3-fs: write access will be enabled during recovery.
Oct 6 18:18:51 camata kernel: [4294678.892000] kjournald starting. Commit interval 5 seconds
Oct 6 18:18:51 camata kernel: [4294678.892000] EXT3-fs: recovery complete.
Oct 6 18:18:51 camata kernel: [4294678.892000] EXT3-fs: mounted filesystem with ordered data mode.
Oct 6 18:18:51 camata kernel: [4294680.157000] NET: Registered protocol family 1
Oct 6 18:18:51 camata kernel: [4294680.477000] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
Oct 6 18:18:51 camata kernel: [4294682.573000] Adding 1466632k swap on /dev/sda4. Priority:-1 extents:1
Oct 6 18:18:51 camata kernel: [4294682.672000] EXT3 FS on sda2, internal journal
Oct 6 18:18:51 camata kernel: [4294685.659000] parport: PnPBIOS parport detected.
Oct 6 18:18:51 camata kernel: [4294685.659000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
Oct 6 18:18:51 camata kernel: [4294685.743000] lp0: using parport0 (interrupt-driven).
Oct 6 18:18:51 camata kernel: [4294685.754000] mice: PS/2 mouse device common for all mice
Oct 6 18:18:51 camata kernel: [4294685.778000] sbp2: $Rev: 1219 $ Ben Collins <bcollins[ presso ]debian.org>
Oct 6 18:18:51 camata kernel: [4294686.042000] input: PS/2 Generic Mouse on isa0060/serio1
Oct 6 18:18:51 camata kernel: [4294688.970000] cdrom: open failed.
Oct 6 18:18:51 camata kernel: [4294688.980000] cdrom: open failed.
Oct 6 18:18:51 camata kernel: [4294690.082000] kjournald starting. Commit interval 5 seconds
Oct 6 18:18:51 camata kernel: [4294690.082000] EXT3 FS on sda3, internal journal
Oct 6 18:18:51 camata kernel: [4294690.082000] EXT3-fs: mounted filesystem with ordered data mode.
Oct 6 18:18:51 camata kernel: [4294690.708000] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00
Oct 6 18:18:51 camata kernel: [4294690.719000] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40
Oct 6 18:18:51 camata kernel: [4294690.919000] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 23
Oct 6 18:18:51 camata kernel: [4294690.919000] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 23 (level, low) -> IRQ 23
Oct 6 18:18:51 camata kernel: [4294691.228000] intel8x0_measure_ac97_clock: measured 49600 usecs
Oct 6 18:18:51 camata kernel: [4294691.228000] intel8x0: clocking to 46835
Oct 6 18:18:51 camata kernel: [4294691.561000] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.32.
Oct 6 18:18:51 camata kernel: [4294691.564000] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
Oct 6 18:18:51 camata kernel: [4294691.564000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 22 (level, low) -> IRQ 22
Oct 6 18:18:51 camata kernel: [4294692.077000] eth0: forcedeth.c: subsystem: 01043:8141 bound to 0000:00:0a.0
Oct 6 18:18:51 camata kernel: [4294692.152000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Oct 6 18:18:51 camata kernel: [4294692.165000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Oct 6 18:18:51 camata kernel: [4294692.295000] eth0: no link during initialization.
Oct 6 18:18:51 camata kernel: [4294692.460000] ohci1394: $Rev: 1250 $ Ben Collins <bcollins[ presso ]debian.org>
Oct 6 18:18:51 camata kernel: [4294692.460000] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
Oct 6 18:18:51 camata kernel: [4294692.461000] ACPI: PCI Interrupt 0000:05:0b.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16
Oct 6 18:18:51 camata kernel: [4294692.514000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[d0004000-d00047ff] Max Packet=[2048]
Oct 6 18:18:51 camata kernel: [4294693.786000] Real Time Clock Driver v1.12
Oct 6 18:18:51 camata kernel: [4294693.822000] input: PC Speaker
Oct 6 18:18:51 camata kernel: [4294693.931000] Floppy drive(s): fd0 is 1.44M
Oct 6 18:18:51 camata kernel: [4294693.965000] FDC 0 is a post-1991 82077
Oct 6 18:18:51 camata kernel: [4294694.483000] ts: Compaq touchscreen protocol output
Oct 6 18:18:52 camata kernel: [4294696.861000] ACPI: Power Button (FF) [PWRF]
Oct 6 18:18:52 camata kernel: [4294696.861000] ACPI: Power Button (CM) [PWRB]
Oct 6 18:18:53 camata kernel: [4294697.355000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
Oct 6 18:18:53 camata kernel: [4294697.355000] apm: overridden by ACPI.
Oct 6 18:18:55 camata kernel: [4294700.172000] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.40.2)
Oct 6 18:18:55 camata kernel: [4294700.172000] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x6 (1400 mV)
Oct 6 18:18:55 camata kernel: [4294700.172000] powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV)
Oct 6 18:18:55 camata kernel: [4294700.260000] Bluetooth: Core ver 2.7
Oct 6 18:18:55 camata kernel: [4294700.260000] NET: Registered protocol family 31
Oct 6 18:18:55 camata kernel: [4294700.260000] Bluetooth: HCI device and connection manager initialized
Oct 6 18:18:55 camata kernel: [4294700.260000] Bluetooth: HCI socket layer initialized
Oct 6 18:18:55 camata kernel: [4294700.270000] Bluetooth: L2CAP ver 2.7
Oct 6 18:18:55 camata kernel: [4294700.270000] Bluetooth: L2CAP socket layer initialized
Oct 6 18:18:56 camata kernel: [4294700.306000] Bluetooth: RFCOMM ver 1.5
Oct 6 18:18:56 camata kernel: [4294700.306000] Bluetooth: RFCOMM socket layer initialized
Oct 6 18:18:56 camata kernel: [4294700.306000] Bluetooth: RFCOMM TTY layer initialized
Oct 6 18:19:10 camata gconfd (alberto-6663): starting (version 2.11.90), pid 6663 user 'alberto'
Oct 6 18:19:10 camata gconfd (alberto-6663): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0
Oct 6 18:19:10 camata gconfd (alberto-6663): Resolved address "xml:readonly:/usr/share/gconf/local.mandatory" to a read-only configuration source at position 1
Oct 6 18:19:10 camata gconfd (alberto-6663): Resolved address "xml:readwrite:/home/alberto/.gconf" to a writable configuration source at position 2
Oct 6 18:19:10 camata gconfd (alberto-6663): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 3
Oct 6 18:19:10 camata gconfd (alberto-6663): Resolved address "xml:readonly:/usr/share/gconf/local.defaults" to a read-only configuration source at position 4
Oct 6 18:19:10 camata gconfd (alberto-6663): Resolved address "xml:readonly:/usr/share/gconf/cdd.defaults" to a read-only configuration source at position 5
Oct 6 18:19:10 camata gconfd (alberto-6663): Resolved address "xml:readonly:/usr/share/gconf/debian.defaults" to a read-only configuration source at position 6
Oct 6 18:19:10 camata gconfd (alberto-6663): Resolved address "xml:readonly:/var/lib/gconf/defaults" to a read-only configuration source at position 7
Oct 6 18:19:10 camata kernel: [4294714.881000] NET: Registered protocol family 10
Oct 6 18:19:10 camata kernel: [4294714.882000] Disabled Privacy Extensions on device c02ea260(lo)
Oct 6 18:19:10 camata kernel: [4294714.882000] IPv6 over IPv4 tunneling driver
Oct 6 18:19:17 camata gconfd (alberto-6663): Resolved address "xml:readwrite:/home/alberto/.gconf" to a writable configuration source at position 0
Oct 6 18:20:26 camata kernel: [4294790.732000] usb 1-4: new full speed USB device using ohci_hcd and address 3
Oct 6 18:20:26 camata kernel: [4294791.129000] CSLIP: code copyright 1989 Regents of the University of California
Oct 6 18:20:26 camata kernel: [4294791.136000] ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded
Oct 6 18:20:26 camata kernel: [4294791.200000] HiSax: Linux Driver for passive ISDN cards
Oct 6 18:20:26 camata kernel: [4294791.200000] HiSax: Version 3.5 (module)
Oct 6 18:20:26 camata kernel: [4294791.200000] HiSax: Layer1 Revision 2.46.2.5
Oct 6 18:20:26 camata kernel: [4294791.200000] HiSax: Layer2 Revision 2.30.2.4
Oct 6 18:20:26 camata kernel: [4294791.200000] HiSax: TeiMgr Revision 2.20.2.3
Oct 6 18:20:26 camata kernel: [4294791.200000] HiSax: Layer3 Revision 2.22.2.3
Oct 6 18:20:26 camata kernel: [4294791.200000] HiSax: LinkLayer Revision 2.59.2.4
Oct 6 18:20:26 camata kernel: [4294791.261000] HFC-S USB: driver module revision 4.34 date 2005/01/26 loaded, (debug=-1)
Oct 6 18:20:26 camata usb.agent[6853]: hfc_usb: loaded successfully
Oct 6 18:20:26 camata kernel: [4294791.274000] HFC-S USB: probing interface(0) actalt(0) minor(0)
Oct 6 18:20:26 camata kernel: [4294791.274000] hfc_usb: probe of 1-4:1.0 failed with error -5
Oct 6 18:20:26 camata kernel: [4294791.274000] HFC-S USB: probing interface(1) actalt(0) minor(0)
Oct 6 18:20:26 camata kernel: [4294791.274000] HFC-S USB: detected "Twister ISDN TA"
Oct 6 18:20:27 camata kernel: [4294791.452000] HiSax: Card 1 Protocol EDSS1 Id=hfc_usb0 (0)
Oct 6 18:20:27 camata kernel: [4294791.452000] HiSax: DSS1 Rev. 2.32.2.3
Oct 6 18:20:27 camata kernel: [4294791.452000] HiSax: 2 channels added
Oct 6 18:20:27 camata kernel: [4294791.452000] HiSax: MAX_WAITING_CALLS added
Oct 6 18:20:27 camata kernel: [4294791.452000] HFC-S USB: starting intr IN fifo:5
Oct 6 18:20:27 camata kernel: [4294791.452000] HFC-S USB: starting intr IN fifo:1
Oct 6 18:20:27 camata kernel: [4294791.452000] HFC-S USB: starting intr IN fifo:3
Oct 6 18:20:27 camata kernel: [4294791.452000] HFC-S USB: starting ISO-chain for Fifo 4
Oct 6 18:20:27 camata kernel: [4294791.452000] HFC-S USB: starting ISO-chain for Fifo 0
Oct 6 18:20:27 camata kernel: [4294791.452000] HFC-S USB: starting ISO-chain for Fifo 2
Oct 6 18:20:27 camata kernel: [4294791.452000] usbcore: registered new driver hfc_usb
Oct 6 18:20:27 camata usb.agent[6846]: hfc_usb: loaded successfully
Oct 6 18:21:47 camata gconfd (root-6996): starting (version 2.11.90), pid 6996 user 'root'
Oct 6 18:21:47 camata gconfd (root-6996): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0
Oct 6 18:21:47 camata gconfd (root-6996): Resolved address "xml:readonly:/usr/share/gconf/local.mandatory" to a read-only configuration source at position 1
Oct 6 18:21:47 camata gconfd (root-6996): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 2
Oct 6 18:21:47 camata gconfd (root-6996): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 3
Oct 6 18:21:47 camata gconfd (root-6996): Resolved address "xml:readonly:/usr/share/gconf/local.defaults" to a read-only configuration source at position 4
Oct 6 18:21:47 camata gconfd (root-6996): Resolved address "xml:readonly:/usr/share/gconf/cdd.defaults" to a read-only configuration source at position 5
Oct 6 18:21:47 camata gconfd (root-6996): Resolved address "xml:readonly:/usr/share/gconf/debian.defaults" to a read-only configuration source at position 6
Oct 6 18:21:47 camata gconfd (root-6996): Resolved address "xml:readonly:/var/lib/gconf/defaults" to a read-only configuration source at position 7
Oct 6 18:22:17 camata gconfd (root-6996): GConf server is not in use, shutting down.
Oct 6 18:22:17 camata gconfd (root-6996): Exiting
Oct 6 18:24:21 camata exiting on signal 15
Oct 6 18:24:22 camata syslogd 1.4.1#17ubuntu1: restart.
Oct 6 18:33:43 camata kernel: [4295588.161000] cdrom: open failed.
Oct 6 18:33:43 camata kernel: [4295588.226000] cdrom: open failed.
Oct 6 18:34:35 camata gconfd (root-7408): starting (version 2.11.90), pid 7408 user 'root'
Oct 6 18:34:35 camata gconfd (root-7408): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0
Oct 6 18:34:35 camata gconfd (root-7408): Resolved address "xml:readonly:/usr/share/gconf/local.mandatory" to a read-only configuration source at position 1
Oct 6 18:34:35 camata gconfd (root-7408): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 2
Oct 6 18:34:35 camata gconfd (root-7408): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 3
Oct 6 18:34:35 camata gconfd (root-7408): Resolved address "xml:readonly:/usr/share/gconf/local.defaults" to a read-only configuration source at position 4
Oct 6 18:34:35 camata gconfd (root-7408): Resolved address "xml:readonly:/usr/share/gconf/cdd.defaults" to a read-only configuration source at position 5
Oct 6 18:34:35 camata gconfd (root-7408): Resolved address "xml:readonly:/usr/share/gconf/debian.defaults" to a read-only configuration source at position 6
Oct 6 18:34:35 camata gconfd (root-7408): Resolved address "xml:readonly:/var/lib/gconf/defaults" to a read-only configuration source at position 7
Oct 6 18:35:05 camata gconfd (root-7408): SIGHUP received, reloading all databases
Oct 6 18:35:05 camata gconfd (root-7408): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0
Oct 6 18:35:05 camata gconfd (root-7408): Resolved address "xml:readonly:/usr/share/gconf/local.mandatory" to a read-only configuration source at position 1
Oct 6 18:35:05 camata gconfd (root-7408): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 2
Oct 6 18:35:05 camata gconfd (root-7408): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 3
Oct 6 18:35:05 camata gconfd (root-7408): Resolved address "xml:readonly:/usr/share/gconf/local.defaults" to a read-only configuration source at position 4
Oct 6 18:35:05 camata gconfd (root-7408): Resolved address "xml:readonly:/usr/share/gconf/cdd.defaults" to a read-only configuration source at position 5
Oct 6 18:35:05 camata gconfd (root-7408): Resolved address "xml:readonly:/usr/share/gconf/debian.defaults" to a read-only configuration source at position 6
Oct 6 18:35:05 camata gconfd (root-7408): Resolved address "xml:readonly:/var/lib/gconf/defaults" to a read-only configuration source at position 7
Oct 6 18:35:05 camata gconfd (root-7408): GConf server is not in use, shutting down.
Oct 6 18:35:05 camata gconfd (root-7408): Exiting
Oct 6 18:35:51 camata gconfd (root-8547): starting (version 2.11.90), pid 8547 user 'root'
Oct 6 18:35:51 camata gconfd (root-8547): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0
Oct 6 18:35:51 camata gconfd (root-8547): Resolved address "xml:readonly:/usr/share/gconf/local.mandatory" to a read-only configuration source at position 1
Oct 6 18:35:51 camata gconfd (root-8547): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 2
Oct 6 18:35:51 camata gconfd (root-8547): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 3
Oct 6 18:35:51 camata gconfd (root-8547): Resolved address "xml:readonly:/usr/share/gconf/local.defaults" to a read-only configuration source at position 4
Oct 6 18:35:51 camata gconfd (root-8547): Resolved address "xml:readonly:/usr/share/gconf/cdd.defaults" to a read-only configuration source at position 5
Oct 6 18:35:51 camata gconfd (root-8547): Resolved address "xml:readonly:/usr/share/gconf/debian.defaults" to a read-only configuration source at position 6
Oct 6 18:35:51 camata gconfd (root-8547): Resolved address "xml:readonly:/var/lib/gconf/defaults" to a read-only configuration source at position 7
Oct 6 18:43:23 camata gconfd (root-8547): GConf server is not in use, shutting down.
Oct 6 18:43:23 camata gconfd (root-8547): Exiting
Oct 6 18:44:38 camata syslogd 1.4.1#17ubuntu1: restart.
Oct 6 18:44:38 camata kernel: Inspecting /boot/System.map-2.6.12-6-386
Oct 6 18:44:38 camata kernel: Loaded 28939 symbols from /boot/System.map-2.6.12-6-386.
Oct 6 18:44:38 camata kernel: Symbols match kernel version 2.6.12.
Oct 6 18:44:38 camata kernel: No module symbols loaded - kernel modules not enabled.
Oct 6 18:44:38 camata kernel: ), disabled.
Oct 6 18:44:38 camata kernel: [4294668.242000] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
Oct 6 18:44:38 camata kernel: [4294668.242000] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
Oct 6 18:44:38 camata kernel: [4294668.243000] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
Oct 6 18:44:38 camata kernel: [4294668.243000] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
Oct 6 18:44:38 camata kernel: [4294668.243000] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
Oct 6 18:44:38 camata kernel: [4294668.244000] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
Oct 6 18:44:38 camata kernel: [4294668.244000] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
Oct 6 18:44:38 camata kernel: [4294668.245000] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
Oct 6 18:44:38 camata kernel: [4294668.245000] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
Oct 6 18:44:38 camata kernel: [4294668.246000] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
Oct 6 18:44:38 camata kernel: [4294668.246000] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
Oct 6 18:44:38 camata kernel: [4294668.247000] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
Oct 6 18:44:38 camata kernel: [4294668.251000] Linux Plug and Play Support v0.97 (c) Adam Belay
Oct 6 18:44:38 camata kernel: [4294668.251000] pnp: PnP ACPI init
Oct 6 18:44:38 camata kernel: [4294668.258000] pnp: PnP ACPI: found 16 devices
Oct 6 18:44:38 camata kernel: [4294668.258000] PnPBIOS: Disabled by ACPI PNP
Oct 6 18:44:38 camata kernel: [4294668.258000] PCI: Using ACPI for IRQ routing
Oct 6 18:44:38 camata kernel: [4294668.258000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Oct 6 18:44:38 camata kernel: [4294668.314000] pnp: 00:00: ioport range 0x4000-0x407f could not be reserved
Oct 6 18:44:38 camata kernel: [4294668.314000] pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
Oct 6 18:44:38 camata kernel: [4294668.314000] pnp: 00:00: ioport range 0x4400-0x447f has been reserved
Oct 6 18:44:38 camata kernel: [4294668.314000] pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved
Oct 6 18:44:38 camata kernel: [4294668.314000] pnp: 00:00: ioport range 0x4800-0x487f has been reserved
Oct 6 18:44:38 camata kernel: [4294668.314000] pnp: 00:00: ioport range 0x4880-0x48ff has been reserved
Oct 6 18:44:38 camata kernel: [4294668.314000] audit: initializing netlink socket (disabled)
Oct 6 18:44:38 camata kernel: [4294668.315000] VFS: Disk quotas dquot_6.5.1
Oct 6 18:44:38 camata kernel: [4294668.315000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Oct 6 18:44:38 camata kernel: [4294668.315000] devfs: 2004-01-31 Richard Gooch (rgooch[ presso ]atnf.csiro.au)
Oct 6 18:44:38 camata kernel: [4294668.315000] devfs: boot_options: 0x0
Oct 6 18:44:38 camata kernel: [4294668.315000] Initializing Cryptographic API
Oct 6 18:44:38 camata kernel: [4294668.315000] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
Oct 6 18:44:38 camata kernel: [4294668.315000] assign_interrupt_mode Found MSI capability
Oct 6 18:44:38 camata kernel: [4294668.315000] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
Oct 6 18:44:38 camata kernel: [4294668.315000] assign_interrupt_mode Found MSI capability
Oct 6 18:44:38 camata kernel: [4294668.315000] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
Oct 6 18:44:38 camata kernel: [4294668.315000] assign_interrupt_mode Found MSI capability
Oct 6 18:44:38 camata kernel: [4294668.315000] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
Oct 6 18:44:38 camata kernel: [4294668.315000] assign_interrupt_mode Found MSI capability
Oct 6 18:44:38 camata kernel: [4294668.315000] isapnp: Scanning for PnP cards...
Oct 6 18:44:38 camata kernel: [4294668.666000] isapnp: No Plug & Play device found
Oct 6 18:44:38 camata kernel: [4294668.681000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Oct 6 18:44:38 camata kernel: [4294668.683000] serio: i8042 AUX port at 0x60,0x64 irq 12
Oct 6 18:44:38 camata kernel: [4294668.684000] serio: i8042 KBD port at 0x60,0x64 irq 1
Oct 6 18:44:38 camata kernel: [4294668.684000] Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
Oct 6 18:44:38 camata kernel: [4294668.684000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Oct 6 18:44:38 camata kernel: [4294668.685000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Oct 6 18:44:38 camata kernel: [4294668.686000] io scheduler noop registered
Oct 6 18:44:38 camata kernel: [4294668.686000] io scheduler anticipatory registered
Oct 6 18:44:38 camata kernel: [4294668.686000] io scheduler deadline registered
Oct 6 18:44:38 camata kernel: [4294668.686000] io scheduler cfq registered
Oct 6 18:44:38 camata kernel: [4294668.686000] RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Oct 6 18:44:38 camata kernel: [4294668.686000] EISA: Probing bus 0 at eisa.0
Oct 6 18:44:38 camata kernel: [4294668.686000] Cannot allocate resource for EISA slot 4
Oct 6 18:44:38 camata kernel: [4294668.686000] EISA: Detected 0 cards.
Oct 6 18:44:38 camata kernel: [4294668.686000] NET: Registered protocol family 2
Oct 6 18:44:38 camata kernel: [4294668.696000] IP: routing cache hash table of 4096 buckets, 32Kbytes
Oct 6 18:44:38 camata kernel: [4294668.696000] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
Oct 6 18:44:38 camata kernel: [4294668.696000] TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
Oct 6 18:44:38 camata kernel: [4294668.696000] TCP: Hash tables configured (established 32768 bind 32768)
Oct 6 18:44:38 camata kernel: [4294668.696000] NET: Registered protocol family 8
Oct 6 18:44:38 camata kernel: [4294668.696000] NET: Registered protocol family 20
Oct 6 18:44:38 camata kernel: [4294668.696000] ACPI wakeup devices:
Oct 6 18:44:38 camata kernel: [4294668.696000] HUB0 XVR0 XVR1 XVR2 XVR3 USB0 USB2 MMAC MMCI UAR1
Oct 6 18:44:38 camata kernel: [4294668.696000] ACPI: (supports S0 S1 S3 S4 S5)
Oct 6 18:44:38 camata kernel: [4294668.696000] Freeing unused kernel memory: 224k freed
Oct 6 18:44:38 camata kernel: [4294668.735000] usbcore: registered new driver usbfs
Oct 6 18:44:38 camata kernel: [4294668.735000] usbcore: registered new driver hub
Oct 6 18:44:38 camata kernel: [4294668.736000] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
Oct 6 18:44:38 camata kernel: [4294668.736000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23
Oct 6 18:44:38 camata kernel: [4294668.736000] ohci_hcd 0000:00:02.0: nVidia Corporation CK804 USB Controller
Oct 6 18:44:38 camata kernel: [4294668.747000] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
Oct 6 18:44:38 camata kernel: [4294668.747000] ohci_hcd 0000:00:02.0: irq 23, io mem 0xd0104000
Oct 6 18:44:38 camata kernel: [4294668.750000] input: AT Translated Set 2 keyboard on isa0060/serio0
Oct 6 18:44:38 camata kernel: [4294668.800000] hub 1-0:1.0: USB hub found
Oct 6 18:44:38 camata kernel: [4294668.800000] hub 1-0:1.0: 10 ports detected
Oct 6 18:44:38 camata kernel: [4294668.809000] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
Oct 6 18:44:38 camata kernel: [4294668.809000] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 22
Oct 6 18:44:38 camata kernel: [4294668.809000] ehci_hcd 0000:00:02.1: nVidia Corporation CK804 USB Controller
Oct 6 18:44:38 camata kernel: [4294668.809000] ehci_hcd 0000:00:02.1: debug port 1
Oct 6 18:44:38 camata kernel: [4294668.809000] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
Oct 6 18:44:38 camata kernel: [4294668.809000] ehci_hcd 0000:00:02.1: irq 22, io mem 0xd0105000
Oct 6 18:44:38 camata kernel: [4294668.809000] ehci_hcd 0000:00:02.1: park 0
Oct 6 18:44:38 camata kernel: [4294668.809000] ehci_hcd 0000:00:02.1: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
Oct 6 18:44:38 camata kernel: [4294668.809000] hub 2-0:1.0: USB hub found
Oct 6 18:44:38 camata kernel: [4294668.809000] hub 2-0:1.0: 10 ports detected
Oct 6 18:44:38 camata kernel: [4294668.841000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Oct 6 18:44:38 camata kernel: [4294668.841000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Oct 6 18:44:38 camata kernel: [4294668.841000] ACPI: bus type ide registered
Oct 6 18:44:38 camata kernel: [4294668.843000] SCSI subsystem initialized
Oct 6 18:44:38 camata kernel: [4294668.845000] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
Oct 6 18:44:38 camata kernel: [4294668.845000] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 21
Oct 6 18:44:38 camata kernel: [4294668.845000] ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD800 irq 21
Oct 6 18:44:38 camata kernel: [4294668.845000] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD808 irq 21
Oct 6 18:44:38 camata kernel: [4294669.046000] ata1: no device found (phy stat 00000000)
Oct 6 18:44:38 camata kernel: [4294669.046000] scsi0 : sata_nv
Oct 6 18:44:38 camata kernel: [4294669.192000] ohci_hcd 0000:00:02.0: wakeup
Oct 6 18:44:38 camata kernel: [4294669.247000] ata2: no device found (phy stat 00000000)
Oct 6 18:44:38 camata kernel: [4294669.247000] scsi1 : sata_nv
Oct 6 18:44:38 camata kernel: [4294669.248000] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
Oct 6 18:44:38 camata kernel: [4294669.248000] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 20
Oct 6 18:44:38 camata kernel: [4294669.248000] ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xC400 irq 20
Oct 6 18:44:38 camata kernel: [4294669.248000] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xC408 irq 20
Oct 6 18:44:38 camata kernel: [4294669.532000] usb 1-2: new full speed USB device using ohci_hcd and address 2
Oct 6 18:44:38 camata kernel: [4294669.603000] ata3: dev 0 ATA, max UDMA/133, 398297088 sectors: lba48
Oct 6 18:44:38 camata kernel: [4294669.604000] nv_sata: Primary device added
Oct 6 18:44:38 camata kernel: [4294669.604000] nv_sata: Primary device removed
Oct 6 18:44:38 camata kernel: [4294669.604000] nv_sata: Secondary device added
Oct 6 18:44:38 camata kernel: [4294669.604000] nv_sata: Secondary device removed
Oct 6 18:44:38 camata kernel: [4294669.604000] ata3: dev 0 configured for UDMA/133
Oct 6 18:44:38 camata kernel: [4294669.604000] scsi2 : sata_nv
Oct 6 18:44:38 camata kernel: [4294669.805000] ata4: no device found (phy stat 00000000)
Oct 6 18:44:38 camata kernel: [4294669.805000] scsi3 : sata_nv
Oct 6 18:44:38 camata kernel: [4294669.805000] Vendor: ATA Model: Maxtor 6B200M0 Rev: BANC
Oct 6 18:44:38 camata kernel: [4294669.805000] Type: Direct-Access ANSI SCSI revision: 05
Oct 6 18:44:38 camata kernel: [4294669.841000] usb 1-4: new full speed USB device using ohci_hcd and address 3
Oct 6 18:44:38 camata kernel: [4294671.902000] NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
Oct 6 18:44:38 camata kernel: [4294671.902000] NFORCE-CK804: chipset revision 162
Oct 6 18:44:38 camata kernel: [4294671.902000] NFORCE-CK804: not 100%% native mode: will probe irqs later
Oct 6 18:44:38 camata kernel: [4294671.902000] NFORCE-CK804: 0000:00:06.0 (rev a2) UDMA133 controller
Oct 6 18:44:38 camata kernel: [4294671.902000] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
Oct 6 18:44:38 camata kernel: [4294671.902000] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Oct 6 18:44:38 camata kernel: [4294672.574000] hda: HL-DT-STDVD-ROM GDR8163B, ATAPI CD/DVD-ROM drive
Oct 6 18:44:38 camata kernel: [4294673.288000] hdb: HL-DT-ST DVDRAM GSA-4163B, ATAPI CD/DVD-ROM drive
Oct 6 18:44:38 camata kernel: [4294673.345000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Oct 6 18:44:38 camata kernel: [4294676.439000] hda: ATAPI 52X DVD-ROM drive, 256kB Cache
Oct 6 18:44:38 camata kernel: [4294676.439000] Uniform CD-ROM driver Revision: 3.20
Oct 6 18:44:38 camata kernel: [4294676.447000] hdb: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
Oct 6 18:44:38 camata kernel: [4294676.458000] SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB)
Oct 6 18:44:38 camata kernel: [4294676.458000] SCSI device sda: drive cache: write back
Oct 6 18:44:38 camata kernel: [4294676.458000] SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB)
Oct 6 18:44:38 camata kernel: [4294676.458000] SCSI device sda: drive cache: write back
Oct 6 18:44:38 camata kernel: [4294676.458000] /dev/scsi/host2/bus0/target0/lun0: p1 p2 p3 p4
Oct 6 18:44:38 camata kernel: [4294676.498000] Attached scsi disk sda at scsi2, channel 0, id 0, lun 0
Oct 6 18:44:38 camata kernel: [4294676.784000] ACPI: Fan [FAN] (on)
Oct 6 18:44:38 camata kernel: [4294676.786000] ACPI: CPU0 (power states: C1[C1])
Oct 6 18:44:38 camata kernel: [4294676.786000] ACPI: Processor [CPU0] (supports 8 throttling states)
Oct 6 18:44:38 camata kernel: [4294676.787000] ACPI: Thermal Zone [THRM] (40 C)
Oct 6 18:44:38 camata kernel: [4294676.856000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel[ presso ]redhat[.com]
Oct 6 18:44:38 camata kernel: [4294676.872000] cdrom: open failed.
Oct 6 18:44:38 camata kernel: [4294676.903000] cdrom: open failed.
Oct 6 18:44:38 camata kernel: [4294676.908000] Attempting manual resume
Oct 6 18:44:38 camata kernel: [4294676.908000] swsusp: Suspend partition has wrong signature?
Oct 6 18:44:38 camata kernel: [4294676.913000] EXT3-fs: INFO: recovery required on readonly filesystem.
Oct 6 18:44:38 camata kernel: [4294676.913000] EXT3-fs: write access will be enabled during recovery.
Oct 6 18:44:38 camata kernel: [4294678.669000] kjournald starting. Commit interval 5 seconds
Oct 6 18:44:38 camata kernel: [4294678.669000] EXT3-fs: sda2: orphan cleanup on readonly fs
Oct 6 18:44:38 camata kernel: [4294678.669000] EXT3-fs: sda2: 1 orphan inode deleted
Oct 6 18:44:38 camata kernel: [4294678.669000] EXT3-fs: recovery complete.
Oct 6 18:44:38 camata kernel: [4294678.672000] EXT3-fs: mounted filesystem with ordered data mode.
Oct 6 18:44:38 camata kernel: [4294679.864000] NET: Registered protocol family 1
Oct 6 18:44:38 camata kernel: [4294680.192000] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
Oct 6 18:44:38 camata kernel: [4294682.255000] Adding 1466632k swap on /dev/sda4. Priority:-1 extents:1
Oct 6 18:44:38 camata kernel: [4294682.337000] EXT3 FS on sda2, internal journal
Oct 6 18:44:38 camata kernel: [4294685.291000] parport: PnPBIOS parport detected.
Oct 6 18:44:38 camata kernel: [4294685.291000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
Oct 6 18:44:38 camata kernel: [4294685.375000] lp0: using parport0 (interrupt-driven).
Oct 6 18:44:38 camata kernel: [4294685.386000] mice: PS/2 mouse device common for all mice
Oct 6 18:44:38 camata kernel: [4294685.411000] sbp2: $Rev: 1219 $ Ben Collins <bcollins[ presso ]debian.org>
Oct 6 18:44:38 camata kernel: [4294685.675000] input: PS/2 Generic Mouse on isa0060/serio1
Oct 6 18:44:38 camata kernel: [4294688.085000] cdrom: open failed.
Oct 6 18:44:38 camata kernel: [4294688.095000] cdrom: open failed.
Oct 6 18:44:38 camata kernel: [4294689.181000] kjournald starting. Commit interval 5 seconds
Oct 6 18:44:38 camata kernel: [4294689.181000] EXT3 FS on sda3, internal journal
Oct 6 18:44:38 camata kernel: [4294689.181000] EXT3-fs: mounted filesystem with ordered data mode.
Oct 6 18:44:38 camata kernel: [4294689.800000] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00
Oct 6 18:44:38 camata kernel: [4294689.811000] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40
Oct 6 18:44:38 camata kernel: [4294690.010000] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 23
Oct 6 18:44:38 camata kernel: [4294690.010000] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 23 (level, low) -> IRQ 23
Oct 6 18:44:38 camata kernel: [4294691.012000] AC'97 0 does not respond - RESET
Oct 6 18:44:38 camata kernel: [4294691.012000] Intel ICH: probe of 0000:00:04.0 failed with error -5
Oct 6 18:44:38 camata kernel: [4294691.240000] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.32.
Oct 6 18:44:38 camata kernel: [4294691.244000] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
Oct 6 18:44:38 camata kernel: [4294691.244000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 22 (level, low) -> IRQ 22
Oct 6 18:44:38 camata kernel: [4294691.757000] eth0: forcedeth.c: subsystem: 01043:8141 bound to 0000:00:0a.0
Oct 6 18:44:38 camata kernel: [4294691.832000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Oct 6 18:44:38 camata kernel: [4294691.845000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Oct 6 18:44:38 camata kernel: [4294691.924000] eth0: no link during initialization.
Oct 6 18:44:38 camata kernel: [4294692.141000] ohci1394: $Rev: 1250 $ Ben Collins <bcollins[ presso ]debian.org>
Oct 6 18:44:38 camata kernel: [4294692.141000] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
Oct 6 18:44:38 camata kernel: [4294692.141000] ACPI: PCI Interrupt 0000:05:0b.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16
Oct 6 18:44:38 camata kernel: [4294692.194000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[d0004000-d00047ff] Max Packet=[2048]
Oct 6 18:44:38 camata kernel: [4294693.425000] CSLIP: code copyright 1989 Regents of the University of California
Oct 6 18:44:38 camata kernel: [4294693.429000] ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded
Oct 6 18:44:38 camata kernel: [4294693.457000] HiSax: Linux Driver for passive ISDN cards
Oct 6 18:44:38 camata kernel: [4294693.457000] HiSax: Version 3.5 (module)
Oct 6 18:44:38 camata kernel: [4294693.457000] HiSax: Layer1 Revision 2.46.2.5
Oct 6 18:44:38 camata kernel: [4294693.457000] HiSax: Layer2 Revision 2.30.2.4
Oct 6 18:44:38 camata kernel: [4294693.457000] HiSax: TeiMgr Revision 2.20.2.3
Oct 6 18:44:38 camata kernel: [4294693.457000] HiSax: Layer3 Revision 2.22.2.3
Oct 6 18:44:38 camata kernel: [4294693.457000] HiSax: LinkLayer Revision 2.59.2.4
Oct 6 18:44:38 camata kernel: [4294693.460000] HFC-S USB: driver module revision 4.34 date 2005/01/26 loaded, (debug=-1)
Oct 6 18:44:38 camata kernel: [4294693.463000] HFC-S USB: probing interface(0) actalt(0) minor(0)
Oct 6 18:44:38 camata kernel: [4294693.463000] hfc_usb: probe of 1-4:1.0 failed with error -5
Oct 6 18:44:38 camata kernel: [4294693.463000] HFC-S USB: probing interface(1) actalt(0) minor(0)
Oct 6 18:44:38 camata kernel: [4294693.463000] HFC-S USB: detected "Twister ISDN TA"
Oct 6 18:44:38 camata kernel: [4294693.656000] HiSax: Card 1 Protocol EDSS1 Id=hfc_usb0 (0)
Oct 6 18:44:38 camata kernel: [4294693.656000] HiSax: DSS1 Rev. 2.32.2.3
Oct 6 18:44:38 camata kernel: [4294693.656000] HiSax: 2 channels added
Oct 6 18:44:38 camata kernel: [4294693.656000] HiSax: MAX_WAITING_CALLS added
Oct 6 18:44:38 camata kernel: [4294693.656000] HFC-S USB: starting intr IN fifo:5
Oct 6 18:44:38 camata kernel: [4294693.656000] HFC-S USB: starting intr IN fifo:1
Oct 6 18:44:38 camata kernel: [4294693.656000] HFC-S USB: starting intr IN fifo:3
Oct 6 18:44:38 camata kernel: [4294693.656000] HFC-S USB: starting ISO-chain for Fifo 4
Oct 6 18:44:38 camata kernel: [4294693.656000] HFC-S USB: starting ISO-chain for Fifo 0
Oct 6 18:44:38 camata kernel: [4294693.656000] HFC-S USB: starting ISO-chain for Fifo 2
Oct 6 18:44:38 camata kernel: [4294693.656000] usbcore: registered new driver hfc_usb
Oct 6 18:44:38 camata kernel: [4294693.846000] Real Time Clock Driver v1.12
Oct 6 18:44:38 camata kernel: [4294693.895000] input: PC Speaker
Oct 6 18:44:38 camata kernel: [4294693.948000] Floppy drive(s): fd0 is 1.44M
Oct 6 18:44:38 camata kernel: [4294693.968000] FDC 0 is a post-1991 82077
Oct 6 18:44:38 camata kernel: [4294694.607000] ts: Compaq touchscreen protocol output
Oct 6 18:44:39 camata kernel: [4294697.193000] ACPI: Power Button (FF) [PWRF]
Oct 6 18:44:39 camata kernel: [4294697.193000] ACPI: Power Button (CM) [PWRB]
Oct 6 18:44:40 camata kernel: [4294697.667000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
Oct 6 18:44:40 camata kernel: [4294697.667000] apm: overridden by ACPI.
Oct 6 18:44:42 camata kernel: [4294700.504000] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.40.2)
Oct 6 18:44:42 camata kernel: [4294700.504000] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x6 (1400 mV)
Oct 6 18:44:42 camata kernel: [4294700.504000] powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV)
Oct 6 18:44:43 camata kernel: [4294700.591000] Bluetooth: Core ver 2.7
Oct 6 18:44:43 camata kernel: [4294700.591000] NET: Registered protocol family 31
Oct 6 18:44:43 camata kernel: [4294700.591000] Bluetooth: HCI device and connection manager initialized
Oct 6 18:44:43 camata kernel: [4294700.591000] Bluetooth: HCI socket layer initialized
Oct 6 18:44:43 camata kernel: [4294700.611000] Bluetooth: L2CAP ver 2.7
Oct 6 18:44:43 camata kernel: [4294700.611000] Bluetooth: L2CAP socket layer initialized
Oct 6 18:44:43 camata kernel: [4294700.646000] Bluetooth: RFCOMM ver 1.5
Oct 6 18:44:43 camata kernel: [4294700.646000] Bluetooth: RFCOMM socket layer initialized
Oct 6 18:44:43 camata kernel: [4294700.646000] Bluetooth: RFCOMM TTY layer initialized
Oct 6 18:45:01 camata gconfd (alberto-6712): starting (version 2.11.90), pid 6712 user 'alberto'
Oct 6 18:45:01 camata gconfd (alberto-6712): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0
Oct 6 18:45:01 camata gconfd (alberto-6712): Resolved address "xml:readonly:/usr/share/gconf/local.mandatory" to a read-only configuration source at position 1
Oct 6 18:45:01 camata gconfd (alberto-6712): Resolved address "xml:readwrite:/home/alberto/.gconf" to a writable configuration source at position 2
Oct 6 18:45:01 camata gconfd (alberto-6712): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 3
Oct 6 18:45:01 camata gconfd (alberto-6712): Resolved address "xml:readonly:/usr/share/gconf/local.defaults" to a read-only configuration source at position 4
Oct 6 18:45:01 camata gconfd (alberto-6712): Resolved address "xml:readonly:/usr/share/gconf/cdd.defaults" to a read-only configuration source at position 5
Oct 6 18:45:01 camata gconfd (alberto-6712): Resolved address "xml:readonly:/usr/share/gconf/debian.defaults" to a read-only configuration source at position 6
Oct 6 18:45:01 camata gconfd (alberto-6712): Resolved address "xml:readonly:/var/lib/gconf/defaults" to a read-only configuration source at position 7
Oct 6 18:45:01 camata kernel: [4294719.245000] NET: Registered protocol family 10
Oct 6 18:45:01 camata kernel: [4294719.245000] Disabled Privacy Extensions on device c02ea260(lo)
Oct 6 18:45:01 camata kernel: [4294719.246000] IPv6 over IPv4 tunneling driver
Oct 6 18:45:13 camata gconfd (alberto-6712): Resolved address "xml:readwrite:/home/alberto/.gconf" to a writable configuration source at position 0
Oct 6 18:45:45 camata gconfd (root-6846): starting (version 2.11.90), pid 6846 user 'root'
Oct 6 18:45:45 camata gconfd (root-6846): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0
Oct 6 18:45:45 camata gconfd (root-6846): Resolved address "xml:readonly:/usr/share/gconf/local.mandatory" to a read-only configuration source at position 1
Oct 6 18:45:45 camata gconfd (root-6846): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 2
Oct 6 18:45:45 camata gconfd (root-6846): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 3
Oct 6 18:45:45 camata gconfd (root-6846): Resolved address "xml:readonly:/usr/share/gconf/local.defaults" to a read-only configuration source at position 4
Oct 6 18:45:45 camata gconfd (root-6846): Resolved address "xml:readonly:/usr/share/gconf/cdd.defaults" to a read-only configuration source at position 5
Oct 6 18:45:45 camata gconfd (root-6846): Resolved address "xml:readonly:/usr/share/gconf/debian.defaults" to a read-only configuration source at position 6
Oct 6 18:45:45 camata gconfd (root-6846): Resolved address "xml:readonly:/var/lib/gconf/defaults" to a read-only configuration source at position 7
Oct 6 18:46:08 camata gconfd (alberto-6712): Exiting
Oct 6 18:46:08 camata shutdown[6148]: shutting down for system halt
Oct 6 18:46:09 camata kernel: [4294787.399000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
Oct 6 18:46:09 camata kernel: [4294787.399000] apm: disabled on user request.
Oct 6 18:46:15 camata gconfd (root-6846): GConf server is not in use, shutting down.
Oct 6 18:46:15 camata gconfd (root-6846): Exiting
Oct 6 18:46:15 camata kernel: Kernel logging (proc) stopped.
Oct 6 18:46:15 camata kernel: Kernel log daemon terminating.
Oct 6 18:46:15 camata exiting on signal 15
Oct 6 19:56:36 camata syslogd 1.4.1#17ubuntu1: restart.
Oct 6 19:56:36 camata kernel: Inspecting /boot/System.map-2.6.12-6-386
Oct 6 19:56:36 camata kernel: Loaded 28939 symbols from /boot/System.map-2.6.12-6-386.
Oct 6 19:56:36 camata kernel: Symbols match kernel version 2.6.12.
Oct 6 19:56:36 camata kernel: No module symbols loaded - kernel modules not enabled.
Oct 6 19:56:36 camata kernel: 6000] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
Oct 6 19:56:36 camata kernel: [4294672.157000] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15)
Oct 6 19:56:36 camata kernel: [4294672.157000] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
Oct 6 19:56:36 camata kernel: [4294672.157000] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
Oct 6 19:56:36 camata kernel: [4294672.158000] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
Oct 6 19:56:36 camata kernel: [4294672.158000] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
Oct 6 19:56:36 camata kernel: [4294672.158000] ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
Oct 6 19:56:36 camata kernel: [4294672.159000] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
Oct 6 19:56:36 camata kernel: [4294672.159000] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
Oct 6 19:56:36 camata kernel: [4294672.160000] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
Oct 6 19:56:36 camata kernel: [4294672.160000] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
Oct 6 19:56:36 camata kernel: [4294672.160000] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
Oct 6 19:56:36 camata kernel: [4294672.161000] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
Oct 6 19:56:36 camata kernel: [4294672.161000] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
Oct 6 19:56:36 camata kernel: [4294672.162000] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
Oct 6 19:56:36 camata kernel: [4294672.162000] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
Oct 6 19:56:36 camata kernel: [4294672.163000] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
Oct 6 19:56:36 camata kernel: [4294672.163000] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
Oct 6 19:56:36 camata kernel: [4294672.164000] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
Oct 6 19:56:36 camata kernel: [4294672.168000] Linux Plug and Play Support v0.97 (c) Adam Belay
Oct 6 19:56:36 camata kernel: [4294672.168000] pnp: PnP ACPI init
Oct 6 19:56:36 camata kernel: [4294672.175000] pnp: PnP ACPI: found 16 devices
Oct 6 19:56:36 camata kernel: [4294672.175000] PnPBIOS: Disabled by ACPI PNP
Oct 6 19:56:36 camata kernel: [4294672.175000] PCI: Using ACPI for IRQ routing
Oct 6 19:56:36 camata kernel: [4294672.175000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Oct 6 19:56:36 camata kernel: [4294672.231000] pnp: 00:00: ioport range 0x4000-0x407f could not be reserved
Oct 6 19:56:36 camata kernel: [4294672.231000] pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
Oct 6 19:56:36 camata kernel: [4294672.231000] pnp: 00:00: ioport range 0x4400-0x447f has been reserved
Oct 6 19:56:36 camata kernel: [4294672.231000] pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved
Oct 6 19:56:36 camata kernel: [4294672.231000] pnp: 00:00: ioport range 0x4800-0x487f has been reserved
Oct 6 19:56:36 camata kernel: [4294672.231000] pnp: 00:00: ioport range 0x4880-0x48ff has been reserved
Oct 6 19:56:36 camata kernel: [4294672.231000] audit: initializing netlink socket (disabled)
Oct 6 19:56:36 camata kernel: [4294672.232000] VFS: Disk quotas dquot_6.5.1
Oct 6 19:56:36 camata kernel: [4294672.232000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Oct 6 19:56:36 camata kernel: [4294672.232000] devfs: 2004-01-31 Richard Gooch (rgooch[ presso ]atnf.csiro.au)
Oct 6 19:56:36 camata kernel: [4294672.232000] devfs: boot_options: 0x0
Oct 6 19:56:36 camata kernel: [4294672.232000] Initializing Cryptographic API
Oct 6 19:56:36 camata kernel: [4294672.232000] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
Oct 6 19:56:36 camata kernel: [4294672.232000] assign_interrupt_mode Found MSI capability
Oct 6 19:56:36 camata kernel: [4294672.232000] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
Oct 6 19:56:36 camata kernel: [4294672.232000] assign_interrupt_mode Found MSI capability
Oct 6 19:56:36 camata kernel: [4294672.232000] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
Oct 6 19:56:36 camata kernel: [4294672.232000] assign_interrupt_mode Found MSI capability
Oct 6 19:56:36 camata kernel: [4294672.232000] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
Oct 6 19:56:36 camata kernel: [4294672.232000] assign_interrupt_mode Found MSI capability
Oct 6 19:56:36 camata kernel: [4294672.232000] isapnp: Scanning for PnP cards...
Oct 6 19:56:36 camata kernel: [4294672.583000] isapnp: No Plug & Play device found
Oct 6 19:56:36 camata kernel: [4294672.598000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Oct 6 19:56:36 camata kernel: [4294672.600000] serio: i8042 AUX port at 0x60,0x64 irq 12
Oct 6 19:56:36 camata kernel: [4294672.601000] serio: i8042 KBD port at 0x60,0x64 irq 1
Oct 6 19:56:36 camata kernel: [4294672.601000] Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
Oct 6 19:56:36 camata kernel: [4294672.601000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Oct 6 19:56:36 camata kernel: [4294672.602000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Oct 6 19:56:36 camata kernel: [4294672.603000] io scheduler noop registered
Oct 6 19:56:36 camata kernel: [4294672.603000] io scheduler anticipatory registered
Oct 6 19:56:36 camata kernel: [4294672.603000] io scheduler deadline registered
Oct 6 19:56:36 camata kernel: [4294672.603000] io scheduler cfq registered
Oct 6 19:56:36 camata kernel: [4294672.603000] RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Oct 6 19:56:36 camata kernel: [4294672.603000] EISA: Probing bus 0 at eisa.0
Oct 6 19:56:36 camata kernel: [4294672.603000] Cannot allocate resource for EISA slot 4
Oct 6 19:56:36 camata kernel: [4294672.603000] EISA: Detected 0 cards.
Oct 6 19:56:36 camata kernel: [4294672.603000] NET: Registered protocol family 2
Oct 6 19:56:36 camata kernel: [4294672.613000] IP: routing cache hash table of 4096 buckets, 32Kbytes
Oct 6 19:56:36 camata kernel: [4294672.613000] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
Oct 6 19:56:36 camata kernel: [4294672.613000] TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
Oct 6 19:56:36 camata kernel: [4294672.613000] TCP: Hash tables configured (established 32768 bind 32768)
Oct 6 19:56:36 camata kernel: [4294672.613000] NET: Registered protocol family 8
Oct 6 19:56:36 camata kernel: [4294672.613000] NET: Registered protocol family 20
Oct 6 19:56:36 camata kernel: [4294672.613000] ACPI wakeup devices:
Oct 6 19:56:36 camata kernel: [4294672.613000] HUB0 XVR0 XVR1 XVR2 XVR3 USB0 USB2 MMAC MMCI UAR1
Oct 6 19:56:36 camata kernel: [4294672.613000] ACPI: (supports S0 S1 S3 S4 S5)
Oct 6 19:56:36 camata kernel: [4294672.613000] Freeing unused kernel memory: 224k freed
Oct 6 19:56:36 camata kernel: [4294672.652000] usbcore: registered new driver usbfs
Oct 6 19:56:36 camata kernel: [4294672.652000] usbcore: registered new driver hub
Oct 6 19:56:36 camata kernel: [4294672.653000] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
Oct 6 19:56:36 camata kernel: [4294672.653000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23
Oct 6 19:56:36 camata kernel: [4294672.653000] ohci_hcd 0000:00:02.0: nVidia Corporation CK804 USB Controller
Oct 6 19:56:36 camata kernel: [4294672.664000] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
Oct 6 19:56:36 camata kernel: [4294672.664000] ohci_hcd 0000:00:02.0: irq 23, io mem 0xd0104000
Oct 6 19:56:36 camata kernel: [4294672.668000] input: AT Translated Set 2 keyboard on isa0060/serio0
Oct 6 19:56:36 camata kernel: [4294672.717000] hub 1-0:1.0: USB hub found
Oct 6 19:56:36 camata kernel: [4294672.717000] hub 1-0:1.0: 10 ports detected
Oct 6 19:56:36 camata kernel: [4294672.726000] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
Oct 6 19:56:36 camata kernel: [4294672.726000] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 22
Oct 6 19:56:36 camata kernel: [4294672.726000] ehci_hcd 0000:00:02.1: nVidia Corporation CK804 USB Controller
Oct 6 19:56:36 camata kernel: [4294672.726000] ehci_hcd 0000:00:02.1: debug port 1
Oct 6 19:56:36 camata kernel: [4294672.726000] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
Oct 6 19:56:36 camata kernel: [4294672.726000] ehci_hcd 0000:00:02.1: irq 22, io mem 0xd0105000
Oct 6 19:56:36 camata kernel: [4294672.726000] ehci_hcd 0000:00:02.1: park 0
Oct 6 19:56:36 camata kernel: [4294672.726000] ehci_hcd 0000:00:02.1: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
Oct 6 19:56:36 camata kernel: [4294672.726000] hub 2-0:1.0: USB hub found
Oct 6 19:56:36 camata kernel: [4294672.726000] hub 2-0:1.0: 10 ports detected
Oct 6 19:56:36 camata kernel: [4294672.758000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Oct 6 19:56:36 camata kernel: [4294672.758000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Oct 6 19:56:36 camata kernel: [4294672.758000] ACPI: bus type ide registered
Oct 6 19:56:36 camata kernel: [4294672.760000] SCSI subsystem initialized
Oct 6 19:56:36 camata kernel: [4294672.762000] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
Oct 6 19:56:36 camata kernel: [4294672.762000] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 21
Oct 6 19:56:36 camata kernel: [4294672.762000] ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD800 irq 21
Oct 6 19:56:36 camata kernel: [4294672.762000] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD808 irq 21
Oct 6 19:56:36 camata kernel: [4294672.963000] ata1: no device found (phy stat 00000000)
Oct 6 19:56:36 camata kernel: [4294672.963000] scsi0 : sata_nv
Oct 6 19:56:36 camata kernel: [4294673.109000] ohci_hcd 0000:00:02.0: wakeup
Oct 6 19:56:36 camata kernel: [4294673.164000] ata2: no device found (phy stat 00000000)
Oct 6 19:56:36 camata kernel: [4294673.164000] scsi1 : sata_nv
Oct 6 19:56:36 camata kernel: [4294673.165000] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
Oct 6 19:56:36 camata kernel: [4294673.165000] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 20
Oct 6 19:56:36 camata kernel: [4294673.165000] ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xC400 irq 20
Oct 6 19:56:36 camata kernel: [4294673.165000] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xC408 irq 20
Oct 6 19:56:36 camata kernel: [4294673.449000] usb 1-2: new full speed USB device using ohci_hcd and address 2
Oct 6 19:56:36 camata kernel: [4294673.520000] ata3: dev 0 ATA, max UDMA/133, 398297088 sectors: lba48
Oct 6 19:56:36 camata kernel: [4294673.521000] nv_sata: Primary device added
Oct 6 19:56:36 camata kernel: [4294673.521000] nv_sata: Primary device removed
Oct 6 19:56:36 camata kernel: [4294673.521000] nv_sata: Secondary device added
Oct 6 19:56:36 camata kernel: [4294673.521000] nv_sata: Secondary device removed
Oct 6 19:56:36 camata kernel: [4294673.521000] ata3: dev 0 configured for UDMA/133
Oct 6 19:56:36 camata kernel: [4294673.521000] scsi2 : sata_nv
Oct 6 19:56:36 camata kernel: [4294673.722000] ata4: no device found (phy stat 00000000)
Oct 6 19:56:36 camata kernel: [4294673.722000] scsi3 : sata_nv
Oct 6 19:56:36 camata kernel: [4294673.722000] Vendor: ATA Model: Maxtor 6B200M0 Rev: BANC
Oct 6 19:56:36 camata kernel: [4294673.722000] Type: Direct-Access ANSI SCSI revision: 05
Oct 6 19:56:36 camata kernel: [4294673.758000] usb 1-4: new full speed USB device using ohci_hcd and address 3
Oct 6 19:56:36 camata kernel: [4294675.818000] NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
Oct 6 19:56:36 camata kernel: [4294675.818000] NFORCE-CK804: chipset revision 162
Oct 6 19:56:36 camata kernel: [4294675.818000] NFORCE-CK804: not 100%% native mode: will probe irqs later
Oct 6 19:56:36 camata kernel: [4294675.818000] NFORCE-CK804: 0000:00:06.0 (rev a2) UDMA133 controller
Oct 6 19:56:36 camata kernel: [4294675.818000] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
Oct 6 19:56:36 camata kernel: [4294675.818000] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Oct 6 19:56:36 camata kernel: [4294676.490000] hda: HL-DT-STDVD-ROM GDR8163B, ATAPI CD/DVD-ROM drive
Oct 6 19:56:36 camata kernel: [4294677.204000] hdb: HL-DT-ST DVDRAM GSA-4163B, ATAPI CD/DVD-ROM drive
Oct 6 19:56:36 camata kernel: [4294677.261000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Oct 6 19:56:36 camata kernel: [4294680.355000] hda: ATAPI 52X DVD-ROM drive, 256kB Cache
Oct 6 19:56:36 camata kernel: [4294680.355000] Uniform CD-ROM driver Revision: 3.20
Oct 6 19:56:36 camata kernel: [4294680.363000] hdb: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
Oct 6 19:56:36 camata kernel: [4294680.374000] SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB)
Oct 6 19:56:36 camata kernel: [4294680.374000] SCSI device sda: drive cache: write back
Oct 6 19:56:36 camata kernel: [4294680.374000] SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB)
Oct 6 19:56:36 camata kernel: [4294680.374000] SCSI device sda: drive cache: write back
Oct 6 19:56:36 camata kernel: [4294680.374000] /dev/scsi/host2/bus0/target0/lun0: p1 p2 p3 p4
Oct 6 19:56:36 camata kernel: [4294680.414000] Attached scsi disk sda at scsi2, channel 0, id 0, lun 0
Oct 6 19:56:36 camata kernel: [4294680.700000] ACPI: Fan [FAN] (on)
Oct 6 19:56:36 camata kernel: [4294680.702000] ACPI: CPU0 (power states: C1[C1])
Oct 6 19:56:36 camata kernel: [4294680.702000] ACPI: Processor [CPU0] (supports 8 throttling states)
Oct 6 19:56:36 camata kernel: [4294680.703000] ACPI: Thermal Zone [THRM] (40 C)
Oct 6 19:56:36 camata kernel: [4294680.789000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel[ presso ]redhat[.com]
Oct 6 19:56:36 camata kernel: [4294680.804000] cdrom: open failed.
Oct 6 19:56:36 camata kernel: [4294680.815000] cdrom: open failed.
Oct 6 19:56:36 camata kernel: [4294680.821000] Attempting manual resume
Oct 6 19:56:36 camata kernel: [4294680.821000] swsusp: Suspend partition has wrong signature?
Oct 6 19:56:36 camata kernel: [4294680.850000] kjournald starting. Commit interval 5 seconds
Oct 6 19:56:36 camata kernel: [4294680.850000] EXT3-fs: mounted filesystem with ordered data mode.
Oct 6 19:56:36 camata kernel: [4294681.493000] NET: Registered protocol family 1
Oct 6 19:56:36 camata kernel: [4294681.975000] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
Oct 6 19:56:36 camata kernel: [4294684.121000] Adding 1466632k swap on /dev/sda4. Priority:-1 extents:1
Oct 6 19:56:36 camata kernel: [4294684.220000] EXT3 FS on sda2, internal journal
Oct 6 19:56:36 camata kernel: [4294687.215000] parport: PnPBIOS parport detected.
Oct 6 19:56:36 camata kernel: [4294687.215000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
Oct 6 19:56:36 camata kernel: [4294687.299000] lp0: using parport0 (interrupt-driven).
Oct 6 19:56:36 camata kernel: [4294687.310000] mice: PS/2 mouse device common for all mice
Oct 6 19:56:36 camata kernel: [4294687.334000] sbp2: $Rev: 1219 $ Ben Collins <bcollins[ presso ]debian.org>
Oct 6 19:56:36 camata kernel: [4294687.598000] input: PS/2 Generic Mouse on isa0060/serio1
Oct 6 19:56:36 camata kernel: [4294690.176000] cdrom: open failed.
Oct 6 19:56:36 camata kernel: [4294690.186000] cdrom: open failed.
Oct 6 19:56:36 camata kernel: [4294690.648000] kjournald starting. Commit interval 5 seconds
Oct 6 19:56:36 camata kernel: [4294690.648000] EXT3 FS on sda3, internal journal
Oct 6 19:56:36 camata kernel: [4294690.648000] EXT3-fs: mounted filesystem with ordered data mode.
Oct 6 19:56:36 camata kernel: [4294691.322000] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00
Oct 6 19:56:36 camata kernel: [4294691.333000] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40
Oct 6 19:56:36 camata kernel: [4294691.533000] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 23
Oct 6 19:56:36 camata kernel: [4294691.533000] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 23 (level, low) -> IRQ 23
Oct 6 19:56:36 camata kernel: [4294691.842000] intel8x0_measure_ac97_clock: measured 49597 usecs
Oct 6 19:56:36 camata kernel: [4294691.842000] intel8x0: clocking to 46833
Oct 6 19:56:36 camata kernel: [4294692.175000] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.32.
Oct 6 19:56:36 camata kernel: [4294692.178000] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
Oct 6 19:56:36 camata kernel: [4294692.178000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 22 (level, low) -> IRQ 22
Oct 6 19:56:36 camata kernel: [4294692.691000] eth0: forcedeth.c: subsystem: 01043:8141 bound to 0000:00:0a.0
Oct 6 19:56:36 camata kernel: [4294692.765000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Oct 6 19:56:36 camata kernel: [4294692.779000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Oct 6 19:56:36 camata kernel: [4294693.058000] ohci1394: $Rev: 1250 $ Ben Collins <bcollins[ presso ]debian.org>
Oct 6 19:56:36 camata kernel: [4294693.058000] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
Oct 6 19:56:36 camata kernel: [4294693.058000] ACPI: PCI Interrupt 0000:05:0b.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16
Oct 6 19:56:36 camata kernel: [4294693.111000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[d0004000-d00047ff] Max Packet=[2048]
Oct 6 19:56:36 camata kernel: [4294694.326000] CSLIP: code copyright 1989 Regents of the University of California
Oct 6 19:56:36 camata kernel: [4294694.330000] ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded
Oct 6 19:56:36 camata kernel: [4294694.359000] HiSax: Linux Driver for passive ISDN cards
Oct 6 19:56:36 camata kernel: [4294694.359000] HiSax: Version 3.5 (module)
Oct 6 19:56:36 camata kernel: [4294694.359000] HiSax: Layer1 Revision 2.46.2.5
Oct 6 19:56:36 camata kernel: [4294694.359000] HiSax: Layer2 Revision 2.30.2.4
Oct 6 19:56:36 camata kernel: [4294694.359000] HiSax: TeiMgr Revision 2.20.2.3
Oct 6 19:56:36 camata kernel: [4294694.359000] HiSax: Layer3 Revision 2.22.2.3
Oct 6 19:56:36 camata kernel: [4294694.359000] HiSax: LinkLayer Revision 2.59.2.4
Oct 6 19:56:36 camata kernel: [4294694.363000] HFC-S USB: driver module revision 4.34 date 2005/01/26 loaded, (debug=-1)
Oct 6 19:56:36 camata kernel: [4294694.365000] HFC-S USB: probing interface(0) actalt(0) minor(0)
Oct 6 19:56:36 camata kernel: [4294694.365000] hfc_usb: probe of 1-4:1.0 failed with error -5
Oct 6 19:56:36 camata kernel: [4294694.365000] HFC-S USB: probing interface(1) actalt(0) minor(0)
Oct 6 19:56:36 camata kernel: [4294694.365000] HFC-S USB: detected "Twister ISDN TA"
Oct 6 19:56:36 camata kernel: [4294694.535000] HiSax: Card 1 Protocol EDSS1 Id=hfc_usb0 (0)
Oct 6 19:56:36 camata kernel: [4294694.535000] HiSax: DSS1 Rev. 2.32.2.3
Oct 6 19:56:36 camata kernel: [4294694.535000] HiSax: 2 channels added
Oct 6 19:56:36 camata kernel: [4294694.535000] HiSax: MAX_WAITING_CALLS added
Oct 6 19:56:36 camata kernel: [4294694.535000] HFC-S USB: starting intr IN fifo:5
Oct 6 19:56:36 camata kernel: [4294694.535000] HFC-S USB: starting intr IN fifo:1
Oct 6 19:56:36 camata kernel: [4294694.535000] HFC-S USB: starting intr IN fifo:3
Oct 6 19:56:36 camata kernel: [4294694.535000] HFC-S USB: starting ISO-chain for Fifo 4
Oct 6 19:56:36 camata kernel: [4294694.535000] HFC-S USB: starting ISO-chain for Fifo 0
Oct 6 19:56:36 camata kernel: [4294694.535000] HFC-S USB: starting ISO-chain for Fifo 2
Oct 6 19:56:36 camata kernel: [4294694.536000] usbcore: registered new driver hfc_usb
Oct 6 19:56:36 camata kernel: [4294694.718000] Real Time Clock Driver v1.12
Oct 6 19:56:36 camata kernel: [4294694.753000] input: PC Speaker
Oct 6 19:56:36 camata kernel: [4294694.835000] Floppy drive(s): fd0 is 1.44M
Oct 6 19:56:36 camata kernel: [4294694.850000] FDC 0 is a post-1991 82077
Oct 6 19:56:36 camata kernel: [4294695.797000] ts: Compaq touchscreen protocol output
Oct 6 19:56:36 camata kernel: [4294696.271000] eth0: no link during initialization.
Oct 6 19:56:37 camata kernel: [4294698.180000] ACPI: Power Button (FF) [PWRF]
Oct 6 19:56:37 camata kernel: [4294698.180000] ACPI: Power Button (CM) [PWRB]
Oct 6 19:56:38 camata kernel: [4294698.705000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
Oct 6 19:56:38 camata kernel: [4294698.705000] apm: overridden by ACPI.
Oct 6 19:56:41 camata kernel: [4294701.726000] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.40.2)
Oct 6 19:56:41 camata kernel: [4294701.727000] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x6 (1400 mV)
Oct 6 19:56:41 camata kernel: [4294701.727000] powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV)
Oct 6 19:56:41 camata kernel: [4294701.814000] Bluetooth: Core ver 2.7
Oct 6 19:56:41 camata kernel: [4294701.814000] NET: Registered protocol family 31
Oct 6 19:56:41 camata kernel: [4294701.814000] Bluetooth: HCI device and connection manager initialized
Oct 6 19:56:41 camata kernel: [4294701.814000] Bluetooth: HCI socket layer initialized
Oct 6 19:56:41 camata kernel: [4294701.833000] Bluetooth: L2CAP ver 2.7
Oct 6 19:56:41 camata kernel: [4294701.833000] Bluetooth: L2CAP socket layer initialized
Oct 6 19:56:41 camata kernel: [4294701.869000] Bluetooth: RFCOMM ver 1.5
Oct 6 19:56:41 camata kernel: [4294701.869000] Bluetooth: RFCOMM socket layer initialized
Oct 6 19:56:41 camata kernel: [4294701.869000] Bluetooth: RFCOMM TTY layer initialized
Oct 6 19:57:12 camata gconfd (alberto-6790): starting (version 2.11.90), pid 6790 user 'alberto'
Oct 6 19:57:12 camata gconfd (alberto-6790): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0
Oct 6 19:57:12 camata gconfd (alberto-6790): Resolved address "xml:readonly:/usr/share/gconf/local.mandatory" to a read-only configuration source at position 1
Oct 6 19:57:12 camata gconfd (alberto-6790): Resolved address "xml:readwrite:/home/alberto/.gconf" to a writable configuration source at position 2
Oct 6 19:57:12 camata gconfd (alberto-6790): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 3
Oct 6 19:57:12 camata gconfd (alberto-6790): Resolved address "xml:readonly:/usr/share/gconf/local.defaults" to a read-only configuration source at position 4
Oct 6 19:57:12 camata gconfd (alberto-6790): Resolved address "xml:readonly:/usr/share/gconf/cdd.defaults" to a read-only configuration source at position 5
Oct 6 19:57:12 camata gconfd (alberto-6790): Resolved address "xml:readonly:/usr/share/gconf/debian.defaults" to a read-only configuration source at position 6
Oct 6 19:57:12 camata gconfd (alberto-6790): Resolved address "xml:readonly:/var/lib/gconf/defaults" to a read-only configuration source at position 7
Oct 6 19:57:12 camata kernel: [4294732.824000] NET: Registered protocol family 10
Oct 6 19:57:12 camata kernel: [4294732.824000] Disabled Privacy Extensions on device c02ea260(lo)
Oct 6 19:57:12 camata kernel: [4294732.825000] IPv6 over IPv4 tunneling driver
Oct 6 19:57:19 camata gconfd (alberto-6790): Resolved address "xml:readwrite:/home/alberto/.gconf" to a writable configuration source at position 0
Oct 6 20:16:36 camata -- MARK --
Oct 6 20:30:33 camata gconfd (alberto-6790): Exiting
Oct 6 20:30:34 camata shutdown[6224]: shutting down for system halt
Oct 6 20:30:35 camata kernel: [4296736.420000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
Oct 6 20:30:35 camata kernel: [4296736.420000] apm: disabled on user request.
Oct 6 20:30:40 camata kernel: Kernel logging (proc) stopped.
Oct 6 20:30:40 camata kernel: Kernel log daemon terminating.
Oct 6 20:30:40 camata exiting on signal 15 |
|
|
|
Trunks
Moderatore
2016 Messaggi |
Inserito il - 11/10/2005 : 18:41:22
|
| urka! Sicuro di aver dato il comando postato da Gimli? In teoria con l'opzione -f dovrebbe mostrarti solo le ultime righe e rimanere in attesa di variazioni...... qua c'è da perdersi :P |
Modificato da - Trunks in data 11/10/2005 18:42:23 |
|
|
| |
Discussione |
|
|
|
modem isdn
Forum Bloccato
