| Autore |
 Discussione  |
|
|
gio1977
Senior Member
138 Messaggi |
 Inserito il - 08/01/2008 : 21:55:55
|
ciao ragazzi.
ho un problema, ho un lettore mp3 della samsung che supporta solo porte usb2.0 .
ora , io possiedo una MSI K7266Pro, con tali caratteristiche tecniche, prese dalla casa madre:
CPU
• Support Socket A for AMD® Athlon™ / Duron™ / Athlon™ XP Processors
• Supports 600MHz ~ 1.4GHz processor
• Supports Athlon™ XP 1500+ ~ 2000+ Processors
Chipset
• VIA® VT8366 (552BGA) Chipset
- FSB [No-Spam] 200/266MHz
- AGP 4x and PCI Advanced high performance memory controller
• VIA® VT8233 (376BGA) Chipset
- High Bandwidth Vlink Client controller
- Integrated Faster Ethernet LPC (Optional CNR card support)
- Integrated Hardware Sound Blaster/Direct Sound AC97 audio
- Ultra DMA 33/66/100 master mode PCI EIDE controller
- ACPI
FSB
• Supports 100/133(200/266)MHz FSB
Main Memory
• Support six memory banks using three 184-pin DDR DIMM.
• Support a maximum memory size up to 3GB.
• Supports 2.5v DDR SDRAM DIMM
Slots
• One CNR (Communication Network Riser).
• One AGP (Accelerated Graphics Port) or AGP Pro slot.
Note : AGP Pro only for K7T266 Pro-R
- AGP specifcation compliant.
- Support AGP 2.0 1x/2x/4x
• Five 32-bit Master PCI Bus slots.
- Supports 3.3v/5v PCI bus Interface.
On-Board IDE
• An IDE controller on the VIA VT8233 chipset provides IDE HDD/CD-ROM with PIO, Bus Master
and Ultra DMA 33/66/100 operation modes.
• Can connect up to four IDE devices.
Audio
• Chip integrated (2 channel S/W audio)
- Direct Sound AC97 Audio
Promise 20265R On-Board
• Support IDE RAID 0 or 1
- can connect a Master and a Slave drive to each IDE RAID connector. The two connectors
support hard disk drives only.
*Note: only the two Master Hard Disk Drives will adopt RAID function
USB Interface (OPTIONAL)
• USB 2.0 HC On Board
- Support 4 USB 2.0 ports via extemal bracket
• USB PC2PC Networking Function
- Controlled by USB PC2PC Controller
- Supported by the JUSB2 pin header
• 6 USB Ports
- Controlled by VT8233 Southbridge
- 2 rear ports and 4 port supported by JUSB2 & JUSB3
On-Board Peripherals
• On-Board Peripherals include:
- 1 Floppy port supports 2 FDD with 360K, 720K, 1.2M, 1.44M and 2.88M bytes.
- 2 Serial ports (COM A+COM B)
- 1 Parallel port supports SPP/EPP/ECP mode
- 1 IrDA connector for SIR/ASKIR/HPSIR
- 1 Audio/Game port
RAGAZZI LA MIA DOMANDA, E':
POSSO IO COMPERARE UNA SLOT DI 4 PORTE USB PCI E MONTARLE SULLA SCHEDA MADRE?
DOVREBBERO FUNZIONARE?? O NON ANDREBBERO? CHI PUO' AIUTARMI??
|
|
|
Yves
Moderatore
Città: Buenos Aires
6097 Messaggi |
Inserito il - 08/01/2008 : 23:06:49
|
Scusa, ma quella mainboard ha già le USB2, comunque si, puoi aggiungere una scheda PCI / USB2..
Ciao. |
 |
|
| |
Discussione |
|
|
|
msi K7266Pro. posso montare usb2.0?
Forum Bloccato
